Materials:
1 pkg. Lime Green on Black Bumpy Beads (#18933) Qty: 
1 pkg. Large Black Rectangles  (#18102) Qty: 
2 pkgs. Jet Round Fire Polished Crystals, 4mm (#16123) Qty: 
1 pkg. Peridot Rounds Druks, 6mm (#22039) Qty: 
1 pkg. 2" Thick silver plated eye pins  (#50594)  Qty: 
1 pkg. Small S/S Bali Spacer Beads (#27539) Qty: 
1 pkg. Silver Plated Toggle Clasps (#50170)  Qty: 

Directions:
Step 1: Make 4 links with the bumpy beads by threading an eye pin with a 4 mm crystal bead, a bumpy bead, and another 4mm bead.  Using flat nose pliers, bend eye pin to a 90 degree angle.  Cut to 3/16".  Carefully bend the 3/16" of wire into a loop, but do not close.
Repeat the process for all 4 links.

Step 2: Make 3 links with the black rectangles by threading an eye pin with a spacer bead, a rectangle, and another spacer and close the link by making a loop as in step 1. 
Repeat process for all 3 links.

Step 3: Attach the links alternating a rectangle link with a bumpy bead link.

Step 4: Attach the lobster clasp on either side of the bracelet by placing the loops of the clasps into the loops of the eye pins and then closing the loops of the eye pins.

Step 5: Make the green dangles by threading an eye pin with a 6mm Peridot Round. Coil the remaining wire like a snail using flat nose pliers, starting at the end.  Attach by twisting open the eye of the pin and placing in between the links and then close the eye tightly.
Repeat process 5 more times.

Step 6: Make the black dangles by threading an eye pin with a 4mm crystal.   Twist the  remaining wire, making a zig-zag design (look at picture).  Repeat process 5 more times.  Attach the black dangles in the same manner and in the same places you attached the green. Enjoy!