Materials:
1 Pkg. Fire Polished Clear AB Crystals, 4mm (#16171) Qty: 
1 Pkg. Peachy Pink Round Fire Polished Crystals, 4mm (#16174) Qty: 
2 Pkg. Peachy Pink Round Fire Polished Crystals, 6mm (#16175) Qty: 
1 Pkg. Rose Swarovski Rounds, 4mm (#16337) Qty: 
1 Pkg. Fuchsia Swarovski Bicones, 5mm (#16519) Qty:  
1 Pkg. Rose Swarovski Bicones, 4mm (#16530) Qty: 
1 Pkg. Pink Round Pearls, 6mm (#26006) Qty: 
1 Pkg. Raspberry Round Pearls, 6mm (#26032) Qty: 
1 Spool of Fine Soft Flex (#49110) Qty: 
1 Pkg. Silver Plated French Hook Ear Wires (#50006) Qty: 
1 Pkg. Silver Plated Jump Rings, 6mm (#50036) Qty: 
1 Pkg. Silver Plated Crimp Beads (#50046) Qty: 
1 Pkg. Silver Plated Hook and Eye Clasps (#50132) Qty: 
2 Pkg. Thick Silver Plated 1” Head Pins, 20 Gauge (#50584) Qty: 
1 Pkg. Thick Silver Plated 1” Eye Pins, 20 Gauge (#50592) Qty: 
Tools you will need (change quantity to 1 if you need them):
Flat Chain Nose Pliers (#51016) Qty: 
Round Nose Pliers (#51017) Qty: 
Side Cutters (#51018) Qty: 
Crimping Pliers (#51004) Qty: 

Necklace Directions:
(Note:  You will have some left over beaded Head Pins and Eye Pins.  These are for the earrings)
Step 1.  Onto each of 17 Head Pins, place a Peachy Pink 6mm Crystal. These will be called Head Pins A.
Step 2. Using Flat Nose Pliers bend each Head Pin 90°.  Cut off the excess Head Pins leaving approximately 3/16".  Using the Round Nosed Pliers carefully bend the 3/16" pieces of wire into loops, and close tightly.  Set aside.
Step 3.  Onto each of 12 Head Pins, place a 4mm Rose Swarovski Bicone. These will be called Head Pins B.
Step 4.  Repeat Step 2.
Step 5.  Onto each of 5 Head Pins, place a 4mm Clear AB Crystal. These will be called Head Pins C.
Step 6.  Repeat Step 2.
Step 7.  Onto each of 2 Head Pins, place a Raspberry Pearl. These will be called Head Pins D.
Step 8.  Repeat Step 2.
Step 9.  Onto each of 2 Eye Pins, place a 4mm Rose Swarovski Round. These will be called Eye Pins #1.
Step 10.  Repeat Step 2 with the Eye Pins.
Step 11.  Onto each of 2 Eye Pins, place a 4mm Clear AB Crystal. These will be called Eye Pins #2. 
Step 12.  Repeat Step 2 with the Eye Pins.
Step 13.  Cut approximately 21” of Soft Flex
Step 14.  String the end of the Soft Flex through a Crimp Bead, through the loop of the hook end of the Clasp, and back through the Crimp Bead. Crush the Crimp.
Step 15.  String the following:
4 Round 4mm Rose Swarovski Rounds
4 Round 4mm Peachy Pink Crystals
Two 4mm Rose Swarovski Bicones
1 Raspberry Pearl
1 Pink Pearl
Step 16.  String the following:
1 Fuchsia Swarovski Bicone
1 Head Pin A
1 Head Pin C
1 Head Pin A
1 Fuchsia Swarovski Bicone
1 Pink Pearl
1 Raspberry Pearl
1 Pink Pearl
1 Head Pin B
1 Head Pin A
1 Head Pin B
1 Fuchsia Swarovski Bicone
1 Pink Pearl
1 Raspberry Pearl
1 Pink Pearl
Step 17.  Repeat Step 16 three times.
Step 18.  String the following:
1 Fuchsia Swarovski Bicone
1 Head Pin A
1 Head Pin C
1 Head Pin A
1 Fuchsia Swarovski Bicone
1 Pink Pearl
1 Raspberry Pearl
1 Pink Pearl
1 Head Pin B
1 Head Pin A
1 Head Pin B
1 Fuchsia Swarovski Bicone
1 Pink Pearl
1 Raspberry Pearl
Two 4mm Rose Swarovski Bicones
4 Round 4mm Peachy Pink Crystals
4 Round 4mm Rose Swarovski Crystals
Step 19.  Repeat Step 14 with the other end of the Clasp.

Earring Directions:
Step 1.  Twist open a Jump ring and place the following:
1 Head Pin A
1 Head Pin B
1 Head Pin D
Twist the Jump Ring closed
Step 2.  Twist open a loop of one of Eye Pin #1 and insert the Jump Ring that you just closed. Twist the loop closed.
Step 3.  Twist open a loop of one of Eye Pin #2 and insert the other loop of Eye Pin #1 that you just attached to the Jump Ring. Twist the loop closed.
Step 4.  Twist open the loop of an Ear Wire and insert the other loop of Eye Pin #2 that you just attached. Twist the Ear Wire loop closed.
Step 5.  Repeat Steps 1-4 for the other earring.