Materials:
1 Pkg. Tigereye Gemstone Rounds, 6mm (#11020-6) Qty: 
1 Pkg. Gold Plated Rounds, 4mm (#14019) Qty: 
1 Pkg. Gold Plated Stardust Beads, 4mm (#14097) Qty: 
1 Pkg. Antique Gold Bali Style Heishi, 4mm (#14701) Qty: 
2 Pkg. Wheat Fields Pony Bead Mix (#17407) Qty: 
1 Pkg. MT AB Amethyst Round Druks, 6mm (#22091) Qty: 
1 Pkg. Large Soft Amber and Dark Topaz Rock Beads (#22231) Qty: 
1 Pkg. Olivine Round Pearls, 6mm (#26024) Qty: 
1 Pkg. Butterscotch Round Swarovski Pearls, 6mm (#26028) Qty: 
1 Pkg. Remembrance™ Bracelet Wire (#49037) Qty: 
1 Pkg. Gold Plated Jump Rings, 4mm (#50039) Qty: 
1 Pkg. Thick Gold Plated Head Pins, 1", 20 gauge (#50583) Qty: 
1 Pkg. Thick Gold Plated Head Pins, 2", 20 gauge (#50585) Qty: 
Tools you will need (change quantity to 1 if you need them): 
Flat Chain Nose Pliers (#51016) Qty: 
Round Nose Pliers (#51017) Qty: 
Side Cutters (#51018) Qty:  
Memory Wire Cutters  (#51005) Qty: 

Directions:
Step 1.  Cut the Memory Wire with your memory wire cutters so that it will coil around your wrist 3 times.  Don't use a side cutter to cut your memory wire, it will damage it.  Also, be sure that the ends of the Wire are in line with each other because when you attach the dangles (the dangles will hang from both ends of the bracelet Wire), you will want them all to be in one cluster, together.
Step 2.  Using a pair of Round Nose Pliers turn back one end of the wire into a loop and close against the Wire
Step 3.  Begin adding Pony Beads to the Wire until you get to the end.  The Pony Bead will be the only thing strung on the Memory Wire.
Step 4.  Onto each of two 2” Head Pins, place a Rock Bead, a Stardust Bead, and a Butterscotch colored Pearl.
Step 5.  Using Flat Nose Pliers, bend the wire of both beaded Head Pins 90°.  Using a Side Cutter cut off the excess from both Head Pins, leaving approximately 3/16".  Carefully bend the 3/16" pieces of wire into loops using Round Nose Pliers and close tightly.
Step 6.  Onto each of two 2” Head Pins, place a Tigereye Gemstone, a Heishi, a Butterscotch colored Pearl, and a Stardust Bead.
Step 7.  Repeat Step 5.
Step 8.  Onto each of two 2” Head Pins, place a Olivine Pearl, a Heishi, a Amethyst Druk, and a Pony Bead.
Step 9.  Repeat Step 5.
Step 10.  Onto each of two 1” Head Pins, place a Heishi, a Tigereye Gemstone, and a Gold Round.
Step 11.  Repeat Step 5.
Step 12.  Onto each of two 1” Head Pins, place a Druk and a Stardust Bead.
Step 13.  Repeat Step 5.
Step 14.  Onto each of two 1” Head Pins, place a Heishi, a Druk, and a Gold Round.
Step 15.  Repeat Step 5.
Step 16.  Onto each of two 1” Head Pins, place a Heishi, an Olivine Pearl, and a Pony Bead.
Step 17.  Repeat Step 5.
Step 18.  Twist open a Jump Ring and insert the loop at one end of the Wire and the loops from 7 different Head Pins (Note: you should have 14 completed Head Pins all together, each has a match, hence the 7 different ones you just attached to your bracelet).  Twist the Jump Ring closed.
Step 19.  Repeat Step 18 with the remaining 7 Head Pins.  Enjoy!