Materials:
1 Pkg. Gold Plated Rounds, 2mm (#14017) Qty: 
1 Pkg. Purple Velvet Swarovski Bicones, 4mm (#16646) Qty: 
1 Pkg. Sand Opal Swarovski Bicones, 4mm (#16654) Qty: 
1 Pkg. Mocha Swarovski Bicones , 3mm (#16657) Qty: 
1 Pkg. Small Soft Amber and Dark Topaz Rock Beads (#22223) Qty: 
1 Pkg. Olivine Round Pearls, 4mm (#26023) Qty: 
1 Gold Plated Adjustable, Beadable Ring (#50267) Qty: 
2 Pkg. 1" Thin Gold Plated Head Pins, 24 gauge (#50579) Qty: 
Tools you will need (change quantity to 1 if you need them):
Flat Chain Nose Pliers (#51016) Qty: 
Round Nose Pliers (#51017) Qty: 
Side Cutters (#51018) Qty:  

Directions:
Step 1.  Onto each of 10 Head Pins, place 1 Rock Bead.  (We will call these Head Pins #1)
Step 2. Using Flat Nose Pliers, bend the wire of each Head Pin 90°.  Using a Side Cutter cut off the excess from each Head Pin, leaving approximately 3/16".  Carefully bend the 3/16" pieces of wire into loops using Round Nose Pliers, but do not close tightly.  Set aside.
Step 3.  Onto each of 10 Head Pins, place 1 Olivine Pearl (These are Head Pins #2)
Step 4.  Repeat Step 2.
Step 5.  Onto each of 10 Head Pins, place 1 Gold Plated Round and 1 Purple Velvet Crystal (These will be Head Pins #3)
Step 6.  Repeat Step 2.
Step 7.  Onto each of 10 Head Pins, place 1 Sand Opal Crystal and 1 Mocha Crystal (These are Head Pins #4)
Step 8.  Repeat Step 2.
Step 9.  Take one of Head Pins #1, one of Head Pins #2, one of Head Pins #3, and one of Head Pins #4.  Insert the open loop of each Head Pin onto the first loop of the Ring, closing the loops of the Head Pins tightly as you add them to the Ring.
Step 10.  Repeat Step 9 for the remaining 9 loops of the Ring.  Enjoy!