Materials:
1 Pkg. Gold Plated Stardust Rounds, 8mm (#14099) Qty: 
1 Pkg. S/L Gold Pony Beads (#17213) Qty: 
1 Pkg. Swarovski Crystal Golden Shadow Bicones, 4mm (#16670) Qty: 
1 Pkg. Swarovski Crystal Golden Shadow Bicones, 5mm (#16671) Qty: 
1 Pkg. Swarovski Crystal Copper Bicones, 3mm (#16673) Qty: 
1 Pkg. Swarovski Crystal Copper Bicones, 4mm (#16674) Qty: 
1 Pkg. Swarovski Crystal Golden Shadow Twist Pendant, 18mm (#16779) Qty: 
1 Pkg. Gold Round Glass Pearls, 6mm (#26010) Qty: 
1 Pkg. Copper Open Wire Bead Caps (#34031) Qty: 
1 Spool of Medium Soft Flex (#49106) Qty: 
1 Pkg. Jump Rings, 6mm (#50035) Qty: 
1 Pkg. Jump Rings, 4mm (#50039) Qty: 
1 Pkg. Gold Plated Crimp Beads (#50045) Qty: 
1 Pkg. Gold Plated Toggle Clasps (#50161) Qty: 

Tools you will need (change quantity to 1 if you need them): 
Crimping Pliers (#51004) Qty: 

Necklace Directions
Step 1.  Cut a strand of SoftFlex about 20” long.
Step 2.  String the SoftFlex through 1 Crimp Bead, then through the loop of one end of the Toggle and then back through the Crimp Bead. Snug the Crimp Bead up to the Toggle and crush the Crimp Bead. Trim the end.
Step 3.  String the following beads:
13 Pony Beads
Two 4mm Golden Shadow Bicones
One 4mm Crystal Copper Bicone
Two 3mm Crystal Copper Bicones
One 4mm Crystal Copper Bicone
Two 4mm Golden Shadow Bicones
Step 4.  String the following beads:
1 Pony Bead
1 Pearl
One 4mm Crystal Copper Bicone
1 Pearl
1 Pony Bead
One 5mm Golden Shadow Bicone
One 4mm Golden Shadow Bicone
Two 3mm Crystal Copper Bicones
One 4mm Golden Shadow Bicones
One 5mm Golden Shadow Bicone
Step 5.  Repeat Step 4 twice
Step 6.  String 1 Pony Bead, 1 Copper Bead Cap, 1 Stardust Bead, 1 Copper Bead Cap, and 1 Pony Bead.
Step 7.  Twist open a 6mm Jump Ring and insert it through the hole in the Twist Pendant. Twist the Jump Ring closed.
Step 8.  Twist open a 4mm Jump Ring and insert it through the 6mm Jump Ring that you just attached to the Twist Pendant.  Twist the Jump Ring closed.
Step 9.  String the 4mm Jump Ring, with the Twist Pendant attached, onto the strand.
Step 10.  Repeat Step 6.
Step 11.  String the following:
One 5mm Golden Shadow Bicone
One 4mm Golden Shadow Bicone
Two 3mm Crystal Copper Bicones
One 4mm Golden Shadow Bicones
One 5mm Golden Shadow Bicone
Step 12.  Repeat Step 4 twice
Step 13.  String the following:
Two 4mm Golden Shadow Bicones
One 4mm Crystal Copper Bicone
Two 3mm Crystal Copper Bicones
One 4mm Crystal Copper Bicone
Two 4mm Golden Shadow Bicones
13 Pony Beads
Step 14.  Repeat Step 2 with the other end of the Toggle Clasp.
Finished!  The finished length of the necklace is approximately 17” long.

Bracelet Directions
Step 1. Cut approximately 10” of Soft Flex
Step 2.  String the SoftFlex through 1 Crimp Bead, then through the loop of
one end of the Toggle and then back through the Crimp Bead. Snug the Crimp Bead up to the Toggle and crush the Crimp Bead. Trim the end.
Step 3.  String 1 Pony Bead
Step 4.  String the following beads:
1 Pony Beads
One 5mm Golden Shadow Bicone
One 4mm Crystal Copper Bicone
One 5mm Golden Shadow Bicone
1 Pony Bead
1 Pearl
1 Pony Bead
1 Copper Bead Cap
1 Stardust Bead
1 Copper Bead Cap
Step 5.  Repeat Step 4 twice
Step 6.  String the following beads:
1 Pony Bead
1 Pearl
1 Pony Bead
One 5mm Golden Shadow Bicone
One 4mm Crystal Copper Bicone
One 5mm Golden Shadow Bicone
2 Pony Beads
Step 7.  Repeat Step 2 with the other end of the Toggle Clasp.
Finished!  The finished length of the bracelet is approximately 7 ½ inches.