Blooming Vintage Bracelet
The rich chocolate patina of our Vintage brass findings mixes beautifully with purple lepidolite rounds and purple crazy agate puff coins and is then accented with forest green fire polished crystals. This asymmetrical design is very contemporary and easy to make shorter or longer by changing the number of links on the chain used. If green is not your favorite color, check out our other colors of fire polished crystals and switch it up.

Materials:
1 Pkg Purple Gemstone Crazy Agate Puff Coins (#11783) Qty:
1 Pkg Purple Gemstone Lepidolite Rondelles (#11878) Qty:
1 Pkg Vintage Sunflower Bead Caps, 10mm (#14075) Qty:
1 Pkg Forest Green Round Fire Polished Crystals, 6mm (#16148) Qty:
1 Foot Vintage Brass Medium Oval Cable Chain, 2+ feet (#62027) Qty:
1 Pkg Large Vintage Lobster Claw Clasps (#50325) Qty:
1 Pkg Vintage Brass Thick Head Pins, 2”, 20 gauge (#50326) Qty:
1 Pkg Vintage Brass Thick Eye Pins, 2”, 20 gauge (#50327) Qty:
1 Pkg Solid Copper Antique Jump Rings, 6mm (#50560) Qty:

Tools and glue you will need (change quantity to 1 if you need them): 
Flat Chain Nose Pliers (#51016) Qty: 
Round Nose Pliers (#51017) Qty: 
Side Cutters (#51018) Qty: 

Directions:
Step 1. Cut 2 sections of Chain that will each contain 5 links. We will call both of these Chain A. Set aside.
Step 2. Cut another 2 sections of Chain that will each contain 6 links. We will call both of these Chain B. Set aside.
Step 3. Onto each of 9 Head Pins, place a Green Crystal.
Step 4. Using a Side Cutter cut off the excess of each Head Pin leaving approximately 3/16". For each Head Pin, using Flat Nose Pliers, bend the 3/16" piece of wire 90°. Using Round Nose Pliers, bend the 3/16" piece of wire from each Head Pin into a loop and close tightly. Set aside.
Step 5. Onto each of 4 Eye Pins, place a Sunflower Bead Cap, a Lepidolite Rondelle, and a Sunflower Bead Cap. We will call these Eye Pins #1
Step 6. Repeat Step 4 with these Eye Pins.
Step 7. Onto an Eye Pin, place a Purple Crazy Agate Puff Coin. We will call this Eye Pin #2.
Step 8. Repeat Step 4 with this Eye Pin.
Step 9. Twist open a Jump Ring and insert a loop from one of Eye Pins #1. Twist the Jump Ring closed.
Step 10. Twist open another Jump Ring and insert the other loop (at the opposite end) of the Eye Pin #1, the loops from three of the Head Pins that contain Green Crystals, and a loop from another of Eye Pins #1. Twist the Jump Ring closed.
Step 11. Repeat Step 10 twice.
Step 12. Twist open a Jump Ring and insert the other loop of your last Eye Pin #1 and the links at one end of both pieces of Chain A. Twist the Jump Ring closed.
Step 13. Twist open another Jump Ring and insert the links at the other ends of both pieces of Chain A and a loop from Eye Pin #2. Twist the Jump Ring closed.
Step 14. Twist open a Jump Ring and insert the loop at the opposite end of Eye Pin #2 and the links at one end of both pieces of Chain B. Twist the Jump Ring closed.
Step 15. Twist open another Jump Ring and insert the links at the other ends of both pieces of Chain B and the loop of the Lobster Claw Clasp. Twist the Jump Ring closed. Enjoy!