Smokey Twist Earrings
All shades of light brown are supposed to be hot this Spring and Summer and these earrings fit right into that category. Two dancing drops are dominated by two tone smoke and brown twist beads and then accented with sparkling light colorado topaz Swarovski crystal beads and silver.

Materials: 
1 Pkg. of Silver Plated Rounds, 4mm (#14027) Qty: 
1 Pkg. of Light Colorado Topaz Swarovski Crystal Bicones, 5mm (#16563) Qty: 
1 Pkg. of Smoke and Brown Small Pressed Glass Twist Beads (#22326) Qty: 
1 Pkg. of Smoke and Brown Large Pressed Glass Twist Beads (#22327) Qty: 
1 Pkg. of Silver Plated Flat French Hook Ear Wires (#50006) Qty: 
1 Pkg. of Thick Silver Plated Head Pins, 2”, 20 gauge (#50586) Qty: 
1 Pkg. of Thick Silver Plated Eye Pins, 2”, 20 gauge (#50594) Qty: 

Tools you will need (change quantity to 1 if you need them):
Flat Chain Nose Pliers (#51016) Qty:   
Round Nose Pliers (#51017) Qty:   
Side Cutters (#51018) Qty: 

Directions:
Step 1. Onto a Head Pin, place a Silver Round, a Large Twist Bead, and a Crystal.

Step 2. Using Flat Nose Pliers, bend the piece of wire 90°. Using a wire cutter cut off the excess Head Pin leaving approximately 3/16". Carefully bend the 3/16" piece of wire into a loop, using Round Nose Pliers, but do not close the loop tightly.

Step 3. Onto an Eye Pin, place a Silver Round, a Small Twist Bead, and a Crystal.

Step 4. Repeat Step 2.

Step 5. Insert the bottom, closed loop of your Eye Pin into the open loop of your Head Pin. Twist the loop of the Head Pin closed.

Step 6. Insert the loop of an Ear Wire into the open loop of your Eye Pin. Twist the loop of the Eye Pin closed tightly.

Step 7. Repeat the above steps for the second earring. Enjoy!