Sweet Dreams Necklace
Just like cloud gazing on a clear summer’s day, this multi strand necklace will remind you of the importance of your dreams. Aqua Mixed Seed Beads and purple striped Pony Beads meet in a thick silver tube with a gorgeous Sky Blue Agate and silver Dream Charm. It measures 20 inches in length, including the Clasp.

Materials:
1 Pkg. 8/0 Blue Mix Seed Beads (#J-8811) Qty:
1 Pkg. Matte AB Royal Blue with White Stripes Pony Beads (#17408) Qty:
1 Pkg. Lined Clear/Luminous Light Blue Seed Beads (#J-837) Qty:
1 Pkg. Silver Plated Curved Large Noodles (#14110) Qty:
1 Pkg. Antique Silver Plated Concave Circle Small Spacers (#14512) Qty:
1 Pale Sky Agate Oval Pendant (#37170) Qty:
1 Cast Antique Silver Plated “Dream” Puff Cloud Charm (#60239) Qty:
1 Pkg. 2 Inch Thick Silver Plated Head Pins (#50586) Qty:
1 Pkg. Silver Plated 3 Strand Tubular Bar Clasps (#50292) Qty:
1 Pkg. 2mm Corrugated Silver Plated Crimps (#50046) Qty:
1 Spool Soft Flex, Medium (#49106) Qty:

Tools you will need (change quantity to 1 if you need them): 
Flat Chain Nose Pliers (#51016) Qty: 
Round Nose Pliers (#51017) Qty: 
Side Cutters (#51018) Qty: 
Crimping Pliers (#51004) Qty: 
Bead Stoppers (#51009) Qty: 

Directions:
Step 1. Cut three pieces of Soft Flex, each measuring about 24 inches in length.

Step 2. Clip a Bead Stopper onto all three strands, about 2 inches from the ends. On one strand, string 8.5 inches of Pony Beads, on another string 8.5 inches of Blue Mix Seed Beads, and 8.5 inches of Light Blue Seed Beads onto the third strand.

Step 3. Thread all three strands through a Small Spacer, then through a Silver Tube. String the Sky Agate Pendant onto a Head Pin and form a simple loop above it by bending the Head Pin 90 degrees with Chain Nose Pliers. Trim with Side Cutters to leave 3/8 inch behind, then curl into a loop with Round Nose Pliers. Thread this loop onto the back of the Dream Charm and squeeze the loop closed.

Step 4. Thread the Dream Charm onto all three strands, followed by another Silver Tube and Small Spacer. Repeat Step 2 with the remaining three strands of Soft Flex. String a Crimp Bead onto each of the remaining six strands of Soft Flex.

Step 5. Keep the Tube Clasp closed. Bring one strand of Soft Flex through a loop and back down through the Crimp Bead. Crush with Crimping Pliers and trim excess Soft Flex. Repeat on the next five strands, keeping the corresponding colors across from one another on the Clasp. Enjoy!