Materials:
1 Pkg. Silver Plated Rounds, 2mm (#14025) Qty: 
1 Pkg. Solid Copper Rounds, 3mm (#34006) Qty: 
1 Pkg. Crazy Lace Agate Cubes, 6mm (#11980) Qty: 
1 Pkg. Light Peach Swarovski Bicone Crystals, 4mm (#16522) Qty: 
1 Pkg. Sand Opal Swarovski Bicone Crystals, 4mm (#16654) Qty: 
1 Pkg. Crystal Red Magma Swarovski Bicone Crystals, 4mm (#16682) Qty: 
1 Pkg. Crystal Silver Shade Swarovski Bicone Crystals, 4mm (#16686) Qty: 
1 Nickel Plated 10 Loop Adjustable Ring (#50268) Qty: 
2 Pkgs. 1” Thick Silver Plated Head Pins (#50584) Qty: 

Tools you will need (change quantity to 1 if you need them):
Flat Chain Nose Pliers (#51016) Qty: 
Round Nose Pliers (#51017) Qty: 
Side Cutters (#51018) Qty: 

Directions:
Step 1. Onto each of 6 Head Pins, slide one Crazy Lace Cube. (Head Pins #1)

Step 2. Using Flat Nose Pliers, bend each of these Head Pins 90° above the bead. Using Side Cutters, cut off the excess from each Head Pin, leaving approximately 3/16". Carefully bend the 3/16" pieces of wire into loops using Round Nose Pliers, but do not close tightly. Set aside.

Step 3. Onto each of 5 Head Pins, slide one Sand Opal and one Copper Round. (Head Pins #2). Repeat step 2.

Step 4. Onto each of 8 Head Pins, slide one Silver Round and one Crystal Red Magma. (Head Pins #3). Repeat step 2.

Step 5. Onto each of 5 Head Pins, slide one Silver Round and one Copper Round. (Head Pins #4). Repeat step 2.

Step 6. Onto each of 6 Head Pins, slide one Peach Crystal and one Silver Round. (Head Pins #5). Repeat step 2.

Step 7. Onto each of 10 Head Pins, slide one Crystal Silver Shade. (Head Pins #6). Repeat step 2.

Step 8. Attach your Head Pins to all the loops on the ring. Insert the open loop of each Head Pin onto the loops of the Ring, closing the loops of the Head Pins tightly as you add them to the Ring. This is the fun part where you become creative and have a free-for-all. Just try to keep the groupings of Head Pins spaced evenly throughout the loops on the ring. Enjoy!